66/80cc 2 Stroke Bicycle Engine Kit

If you’re looking for a performance engine that’ll last, look no further than our 66/80cc PK 80 bicycle engine kit! Perfect for those comfortable with faster engines and have a desire to get up and go, the PK 80 bike engine kit will have your ordinary beach cruiser soaring down the street . There’s no rope pulling needed and you can stop or start the engine as you ride: just pedal the bike normally and start the engine by releasing the clutch lever. All of the motorized bike engines feature the latest upgrades, including Japanese crank bearings and clutch components. We make certain that all of our manufactures abide by strict quality control assurance measures and use the highest quality material so that we can make certain that all of our customers get only the best. Made for experienced riders and builders, our PK 80 66cc engine kit is ready soar- are you? On top of our strict quality assurance measures, we also back our engines with an industry leading 6 month warranty Product Dimensions and Specifications The PK 80 66/80cc bike engine kit is about 8.5″ height 7″ length 5″ width. The bike engine kit fits on standard, male frames with tubing of 25mm to 29mm in diameter. Larger frame sizes require drilling into bike frame with a stationary bolt and use the universal face plate to mount the front of the engine. Top Speed: 25-38 MPH (miles per hour) stock Fuel Economy: 100-150 miles per gallon The engine chain does not interfere with your current drive chain and peddling because it rides on the opposite side of the bike sprocket. Product Requirements Installation is a breeze! The rider only needs some basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation). Fits Most 26″ Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11” of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″). Due to Regulations no California Residence Buyers. California Residence Please Check California Air Resource Board Package includes *(Products pictured may come in different colors but does not hinder performance.)

  • Silver 66/80cc 2-Stroke Engine
  • Low Profile Carburetor
  • Upgraded Chrome Muffler
  • Complete Clutch Cable Assembly with Clutch Wire Clip
  • Drive Chain Idler Pulley
  • Top Quality Japanese 202 Main Bearings
  • 415 Bike Engine Drive Chain
  • Drive Chain Guard
  • 2-Stroke Spark Plug
  • Electron Ignition Coil (CDI)
  • Locking Alloy Clutch Lever
  • Upgraded Twist Throttle and Cable With Grip
  • Updated 1.5L Black Teardrop Gas Tank (approx. ¼ of a gallon)
  • Fuel Line
  • Throttle Cable
  • Gasoline Tank Switch
  • Sprocket Clamp Assembly
  • 44 Tooth Chrome Drive Sprocket with 9 Holes
  • Large Spring (Heat Shield Spring)
  • Extension Spring (Recoil Spring)
  • High Quality Japanese Bearings on Both Ends of Crank
  • Required Hardware and Gaskets
  • Magneto
  • Kill Switch
  • Bonus: Spark Plug Removal Tool (While Supplies Last)!
  • Bonus: Standard Universal Mounting Bracket
Motorized Bicycle Engine Kits

Motorized Bicycle Engine Kits

$179.00 plus shipping

Click ADD TO CART to BUY NOW

or call 281-570-5140 to order

 

 





 


BELOW: 48cc 4 Stroke Motorized Bicycle Engine Kit

4stroke-300
 

$350.00 plus shipping

 

Click ADD TO CART to BUY NOW

or call 281-570-5140 to order

 

 





 

Flying Horse 5G 4-Stroke Bicycle Engine Kit

Ready for a ride that will last? If you’re looking for a tough, reliable, long-lasting bicycle engine kit look no further than our Flying Horse 5G 4 stroke engine! The all new Flying Horse 5G 4 stroke bike engine kit features a centrifugal clutch and pull start enhancements, with all of the latest features and upgraded components Flying Horse has to offer. This 4 stroke bike engine kit is truly the cream of the bike kit crop. Forget premixing oil and fuel! Instead, this engine features an independent oil reservoir which keeps the engine well lubricated. This is the reason the 4 stroke engines are known for their reliability and long life. Moreover, with the centrifugal clutch feature, there is no need to engage and disengage the engine manually. Similar to an engine for a scooter or goped, you simply pull the starter chord and hit the throttle to go! When the bike is stopped, the engine will automatically disengage so that the engine will stay running. This kit is perfect for those that are looking for the added reliability and ease of use of a 4 stroke engine with an automatic transmission. This kit comes with all the components you’ll need to convert a compatible bicycle into a motorized bicycle. Startup is a breeze and you can stop the engine with a simple killswitch provided with the throttle assembly. Don’t be fooled by other retailers, selling outdated, non-EPA approved, old generation bicycle engine kits! All of the Flying Horse engines feature the latest updates, including high quality needle bearings and Japanese ball bearings. Older generation engines use cheap bushings that do not last! We take extra measures to ensure our manufactures abide by strict quality control assurance measures and use the highest quality material so that we can make certain that all of our customers get only the best! With these strict quality assurance measures, we are able to offer a industry leading 6 month warranty! Product Requirements For installing this kit buyer may need some basic hardware skills, tools, and take around 2-3 hours to install and do some adjustments. Seller is not responsible for misuse or this kit or any warranty after installation. This is a do-it-yourself kit and being such all repairs, maintenance and modifications are the responsibility of the buyer. Bicycle engine kit fits most 26″ Wheel Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. Please check to see if your bike is compatible. Product Dimensions and Specifications 48cc engine kit is about 9″ height 9.5″ length 7″ width. The bicycle gas engine kit includes a mounting plate that fits on standard 25mm to 29mm frame tube. Larger frame size requires modification to the mounting plate and/or frame of your bicycle. Flying Horse 5G 4-Stroke bicycle engine kit offers: 3-4 HP (horse power) 20 to 25 mph depending on the gear ratio and weight. Fuel Economy: MPG 100-150 miles per gallon Independent drive sprocket and chain does not interfere with your current drive chain and peddling can be restored with a wide crank assembly. Package Includes *(Products pictured may come in different colors but does not hinder performance.)

  • Flying Horse 2014 5G 4-Stroke Centrifugal Transfer Case
  • HuaSheng 49cc Pull Start Bicycle Engine
  • High Performance Low Profile Carburetor
  • Upgraded Hush Muffler
  • High Quality Japanese Main Bearings
  • Heavy Duty 415 Bike Chain
  • Upgraded Chain Tension Guide
  • Chain Guard
  • Spark Plug
  • CDI (Ignition Coil)
  • Upgraded Twist Throttle and cable with matching grip
  • Engine Mounting Plate
  • Black Teardrop Gas Tank (1.5L)
  • Fuel Line
  • Throttle Cable
  • Gasoline Tank Switch
  • Sprocket Clamp Assembly
  • High Quality Needle Bearings on Both Ends Crank
  • 50 Tooth Chrome Sprocket with 9 Holes
  • Magneto
  • Kill Switch
  • Required Hardware and Gaskets
  • Bonus: Spark Plug Removal Tool (While Supplies Last)!
  • Bonus: Wide crank set with accompanying bottom bracket (While Supplies Last)!

 

$350.00 plus shipping

 

Click ADD TO CART to BUY NOW or call 281-570-5140 to order

 

 





 



Motorized Trike 3 Wheeler / Standard Beach Cruiser Engine Kits

Here is a great way to motorize your 3 wheeler trike or Standard Beach Cruiser Bicycle. Only $375.00 Delivered

Here is our instruction video showing how to install The Front Mount Kit on a 3 wheeler trike

CLICK Add to Cart BUTTON Below to ORDER NOW! Or Call 281-570-5140





Our Motor Kit mounts easily to your front wheel in minutes ! Works on Trikes and regular bicycles.

Front Wheel Mount Moto Bike Kit Motorized Trke Motor Kit Engine Motorized 3 Wheel Trike Engine Kit Motor Kit 3 Wheeler Trike • Made in the USA • Works on two and three wheel bicycles • Fits on practically any bicycle • No added belts, chains or gears to deal with or create loss of horsepower • 10 pound weight is the lightest on the market • Integrated carburetor and primer pump system • Clutch and throttle mounted on handle bars • Top speed of 25-30 MPH – 200 Smiles per gallon • Simple on and off drive system that is easy to adjust • Improved electronic ignition – easy start • Bicycle can be ridden motorized or peddled with no engine drag • 90 day warranty on manufacturer defects

Only $375.00 Delivered

Bolt On Motorized Bicycle Engine Kit

Only $375.00 Delivered

CLICK BUY IT NOW Button Below to ORDER NOW! Or Call 281-570-5140






38cc 4 Stroke Friction Drive Rear Mount Motorized Bicycle Kit

38cc 4 Stroke Friction Drive Rear Mount Motorized Bicycle Kit

38cc 4 Stroke Friction Drive Rear Mount Motorized Bicycle Kit

The Flying Horse 38cc Lock & Load Friction Drive bike engine kit just made motorizing your bike a lot easier. Unlike other bicycle engines that mount in the center of your frame, friction drive motors mount directly over your wheel, which gives you a wider range of bicycles you can use with this motor. Its compact design also eliminates the need for a bulky gas tank on your frame- there’s one built right on to the engine. And because it mounts over your bike’s wheel you don’t even need to install a rear drive sprocket: the friction from the mount’s drive shaft will pull your wheel using friction to rub against the tire and propel. Of course, you still receive everything you’ve come to expect from Flying Horse: quality parts and excellent service. So if you’re looking to motorize your bike without all the hassle other bikes will give you, get ready to rock with the Flying Horse 38cc Lock & Load Friction Drive 4-Stroke Bicycle Engine Kit

Only $279 plus $29.99 shipping !





4 Stroke Rear Mount Motorized Bicycle Kit

4 Stroke Rear Mount Motorized Bicycle Kit

4 Stroke Rear Mount Motorized Bicycle Kit

4 Stroke Rear Mount Motorized Bicycle Kit

Engine Specifications:

  • 38cc Engine is 8″x 10″ x 9.5″ and fits on to nearly any bike with standard tires. The mount can support tires up to 3″ in width.
  • Goes over 15 MPH and gets around 100 miles per gallon
  • Displacement: 37.7cc
  • Type: 4-Stroke
  • Bore x Strone: 40x30mm
  • Max Output: 1.0kW/ 6500r/min
  • Max Torque: 1.67Nm/ 5500r/min
  • Air cooled
  • Tansistor Magneto ignition system
  • Counter Clockwise PTO Shaft Rotation

Package Includes:

  1. 38cc Lock & Load Friction Drive 4-Stroke Engine
  2. Friction Drive Mounting Plate
  3. Bicycle Mounting Kit w/ Hardware
  4. Throttle Grip Handles
  5. Kill switch
  6. Throttle Cable

38cc 4 Stroke Friction Drive Rear Mount Motorized Bicycle Kit

Only $279 plus $29.99 shipping !





Disclaimer: Operating this motorized bicycle and bicycle engine kit involved some risk of serious bodily injury. Buyer accepts responsibility for any and all vehicle operation that may lead to personal injury, economic loss, social distress, other losses, costs and damages. Seller is not responsible for injuries and/or damages resulting from operating this motorized bicycle or bicycle engine kit. Upon purchase, the buyer agrees to use products for racing (closed-course competition) only and not for on/off public roads.

Bikes for SaleMotor Kits - Boardtrack Custom Frames - VideosPartsContactMotorized Trike Kits

—————————————————!>

eXTReMe Tracker